Coolant Air Bleed Hose Replacement

Coolant Air Bleed Hose Replacement

Removal Procedure

1. Drain the cooling system.




2. Remove the engine sight shield.
3. Remove the air cleaner resonator outlet duct.
4. Reposition the coolant air bleed hose clamp at the throttle body.
5. Remove the coolant air bleed hose from the throttle body.




6. Reposition the hose clamp at the pipe.
7. Remove the coolant air bleed hose (1) from the pipe (2).
8. Remove the coolant air bleed hose from the vehicle.

Installation Procedure




1. Install the coolant air bleed hose (1) to the pipe (2).
2. Position the hose clamp at the pipe.




3. Install the coolant air bleed hose to the throttle body.
4. Position the coolant air bleed hose clamp at the throttle body.
5. Install the air cleaner resonator outlet duct.
6. Install the engine sight shield.
7. Add engine coolant, if necessary.