Engine Mount Replacement - Right

Engine Mount Replacement - Right Side

Removal Procedure




1. Remove the engine mount-to-frame bracket bolts.
2. Raise and suitably support the vehicle.




3. Remove the engine shield bolts.
4. Remove the engine shield.
5. Remove the air conditioning (A/C) compressor.
6. Remove the starter motor.

Important: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.

7. Raise and suitably support the engine using adjustable (screw type) jack stands.




8. Remove the engine mount bolts (left side shown, right side similar).
9. Remove the right engine mount.

Installation Procedure




1. Position the right engine mount to the engine (left side shown, right side similar).

Notice: Refer to Fastener Notice.

2. Install the engine mount bolts.

Tighten the engine mount bolts to 50 N.m (37 lb ft).

3. Lower the engine.
4. Remove the adjustable jack stands.
5. Install the starter motor.
6. Install the A/C compressor.




7. Position the engine shield to the vehicle.
8. Install the engine shield bolts.

Tighten the engine shield bolts to 30 N.m (22 lb ft).

9. Lower the vehicle.




10. Install the engine mount-to-frame bracket bolts.

Tighten the engine mount-to-frame bracket bolts to 65 N.m (48 lb ft).