Back Window Motor: Service and Repair

Midgate Window Regulator Motor Assembly

Removal Procedure

1. Move the rear seat cushions forward.
2. Fold the seat backs down.




3. Remove the midgate window.
4. Remove the lower window regulator nuts.
5. Remove the upper window regulator nuts.
6. Carefully move the window regulator to one side.
7. Disconnect the electrical connector to the window regulator module.




8. Remove the window regulator assembly from the midgate structure. A slight twisting motion is required for removal.
9. Remove the 4 screws securing the window motor to the regulator assembly.
10. Remove the window motor.

Installation Procedure

1. Install the new window motor to the window regulator.

Notice: Refer to Fastener Notice.

2. Install the screws.

Tighten the screws to 6 N.m (53 lb in).




3. Install the window regulator assembly.
4. Reposition the rear seats.