Power Mirror Switch: Service and Repair

Removal

Driver Door Mirror Switch
1. Disconnect the negative battery terminal.
2. Remove the front door trim.

3. Remove the screws from power window switch (A) and connectors (B).




4. Remove the driver power window switch (A) from front door trim.





NOTE:
Be careful not to damage the hook when removing the switch module.

Installation

Driver Door Mirror Switch
1. Install the driver power window switch and connectors.
2. Install the front door trim.

Inspection

1. Remove the front door trim and power door mirror switch module (A).




2. Check for the continuity between terminals of power door mirror switch according to the table.