Accelerator Pedal: Service and Repair

REMOVAL
1. Remove the bushing and inner cable on the accelerator arm side.
2. Remove the bolts of the accelerator arm bracket and remove.

Accelerator Bracket Sealant Points:

INSTALLATION
1. When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.
2. Apply sealant to the bolt mounting hole, and tighten the accelerator arm bracket.

Tightening torque
Accelerator arm bracket bolts 8 - 12 Nm (80 - 120 kg.cm, 5.8 - 7.2 lb.ft)