A/T - Possible MIL ON, DTC P0748 Set
GROUP: TRANSAXLENUMBER: 98-40-006
DATE: AUGUST, 1998
MODEL: 1998 TIBURON
(Automatic Transaxle only)
Subject
DIAGNOSTIC CODE PO748
PRESSURE CONTROL SOLENOID CIRCUIT
DESCRIPTION:
Some 1998 automatic transaxle Tiburon vehicles produced between 8/13/97 and 2/28/98 may have Diagnostic Code (DTC) P0748 stored in memory in the Transaxle Control Module (TCM). If a vehicle has DTC P0748 stored in memory in the TCM, follow the repair procedure.
If the Malfunction Indicator Lamp (MIL) is illuminated and an additional DTC is stored in memory in the TCM follow the procedure in the appropriate Shop Manual or Fault Code Diagnostic Manual to repair the DTC before performing the repair procedure described.
SERVICE PROCEDURE:
1. Record the customer's pre-set radio stations and remove the battery.
2. Disconnect the E35 connector from the left front headlamp.
3. Connect the two connectors of the field fix kit between the left front headlamp and the E35 connector.
4. Remove the ground bolt at G04.
5. Attach the ground wire of the field fix kit to the original ground wires (at G04) and reinstall the ground bolt. Tighten the bolt to specification (9-11 Nm (93-110kg.cm, 6.5-8.0 lb.ft)).
6. Use the tie-wrap included in the kit to attach the field fix kit to the turn signal wire to prevent contact with the battery.
7. Reinstall the battery and reset the customers radio stations and clock.
PARTS INFORMATION:
PART NAME PART NUMBER
Wiring Kit 91200-27Q01
Note:
The part number has changed from 91200-2700T to 91200-27Q01 on the part database registration.
WARRANTY INFORMATION: