Transmission Cooler: Service and Repair

AUTOMATIC TRANSAXLE OIL COOLER ASSEMBLY





Components

Removal and Installation

1. Loosen the hose clamps, and then disconnect the transaxle oil cooler hoses.

CAUTION:
Plug the ends of the oil cooler hoses and the automatic transaxle port to prevent the transaxle fluid from spilling out and foreign material from getting in. Plug the nipple at the automatic transaxle in order to prevent entrance of foreign material into the automatic transaxle.

NOTE: When removing each part, avoid spilling the transaxle fluid.

2. Installation is the opposite of removal