Rear Bumper: Service and Repair

REAR BUMPER

Rear Bumper:

REMOVAL AND INSTALLATION

1. Remove the rear combination lamp.
Disconnect the combination lamp connector.






2. Remove the luggage mat and remove the rear transverse trim.






3. Remove the luggage rear trim.






4. Remove the luggage side trim.






5. Remove the rear bumper quarter bracket side mounting nuts and bolt.

Tightening torque 4-6 N.m (40-60 kg.cm, 2.88-4.32 lb.ft)






6. Remove the rear bumper upper mounting retainer from the rear bumper.






7. Disconnect the licence lamp connector from the rear bumper cover and remove the rear bumper beam assembly.

Tightening torque 25-30 N.m (250-300 kg.cm, 18.0-21.6 lb.ft)






8. Installation is the reverse of removal.