Parking Brake Cable: Adjustments
ADJUSTMENT OF PARKING BRAKE STROKE1. Pull the brake lever with a force of approximately 196 N (2.0 kg, 44 lbs.)and check the number of clicks.
Parking brake lever stroke (Standard value): 8 clicks
2. If the number of notches is not the standard value, adjust the cable length with the adjusting nut on the equalizer.
3. The indicator light will go out when the brake lever is fully released, and will light up with the lever pulled one notch. If it does not operate properly, replace it.
4. After the adjustment, check that the rear brakes do not drag with the parking brake lever released