Rear Door Window Glass: Adjustments

Rear Door Glass Clearance:

COMPONENTS

ADJUSTMENT




1. Adjust the rear door front channel by using the adjust bolt.
(Distance between the rear door front channel and door inner panel: 0 mm)




2. Adjust the regulator by using the adjust bolts.
(Distance between the regulator and door inner panel: 12.1 mm (0.47 in.))




3. Adjust and set the front and rear stabilizers in the positions which will ensure correct clearance, and tighten the stabilizer nuts securely.

NOTE: When the glass is fully closed, the glass end must be parallel to the weatherstrip in the roof section and the two stopper catch must simultaneously come into contact.