M/T - Dual Mass Flywheel/Clutch Installation Procedure

Group: TRANSAXLE

Number: 02-40-025

Date: OCTOBER, 2002

Model: 2003 TIBURON

Subject
2003 TIBURON DUAL MASS FLYWHEEL AND CLUTCH DISC ASSEMBLY INSTALLATION PROCEDURE

DESCRIPTION:

The 2003 MY 2.7L Tiburon vehicle equipped with the 6-speed manual transaxle employs a dual mass flywheel system. The 2003 Tiburon Shop Manual does not show the clutch disc assembly with the dual mass flywheel. This bulletin provides information about how to assemble these components.

NOTE:
Although it is possible to assemble the clutch disc with either side facing the flywheel surface, only the assembly of these two parts shown in this bulletin is correct.

PARTS ASSEMBLY:

1. Attach the dual mass flywheel to the engine crankshaft assembly.





2. Identify the clutch disc flange side and the collar side as shown.





3. Install the collar side of the clutch disc on the dual mass flywheel surface so that the flange side is facing the pressure plate side as shown.





4. Attach the pressure plate to the dual mass flywheel and complete assembly of the remaining components per the Shop Manual procedures.