Front Wiper Motor

FRONT WIPER MOTOR

REMOVAL




1. Remove the windshield wiper arm and blade after removing a nut.

TORQUE : 28-32 N.m (2.8-3.2 kgf.m, 20-23.1 lbf.ft)




2. Remove the weather strip (A) then remove the cowl top cover (B) after removing 6 clips (C).




3. Remove the windshield wiper motor and linkage assembly after removing 2 bolts. Disconnect the wiper motor connector (A) from the wiper motor & linkage assembly.

TORQUE : 7-11 N.m (0.7-1.1, kgf.m, 5.1-8.1 lbf.ft)

4. Installation is the reverse of removal.

INSTALLATION




1. Install the wiper arm and blade to the specified position.




2. Set the washer nozzle on the specified spray position.