Rear Wiper Motor

REAR WIPER MOTOR

REMOVAL




1. Remove the upper and side trim from the tailgate frame.




2. Remove the tailgate trim panel after removing 4 screws.




3. Remove the rear wiper arm after removing a nut.

Tightening torque : 14 - 17 N.m (140 - 170 kg.cm, 10.3 - 12.5 lb.ft)




4. Remove the hexagonal nut after removing pivot cover.

Tightening toque : 14 - 17 N.m (140 - 170 kg.cm, 10.3 - 12.5 lb.ft)




5. Remove the rear wiper motor after removing 3 bolts, and disconnect the motor's connector.

INSTALLATION
1. Installation is the reverse of removal.




2. Set the washer nozzle on the specified spray position.