Diesel Data: Automotive Repair

Power Mosfet

POWER MOSFET

INSPECTION
1. Ignition "ON"
2. Manually operate the control switch and measure the voltage of blower motor between pin 1 and 2.




Specification:




3. Select the control switch to raise voltage until high speed.

AUTO COOLING: Auto speed (4.5 V - B+)
AUTO HEATING: Auto speed (4.5 V - 10.5 V)

4. If the measured voltage is not specification, substitute with a known-good power mosfet and check for proper operation.
5. If the problem is corrected, replace the power mosfet.