Component Inspection

Component Inspection

1. Check OCV
(1) Connect scantool to Data Link Connector (DLC).
(2) Key "ON".
(3) Perform "Actuation Test" for OCV.




(4) Does the OCV work normally ? (Check clicking sound)
YES
1) Substitute with a known-good CVVT and check for proper operation. If the problem is corrected, replace CVVT and then go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known-good OCV and check for proper operation. If the problem is corrected, replace OCV and then go to "Verification of Vehicle Repair" procedure.