Wiper Motor: Service and Repair

Removal

1. Remove the windshield wiper arm and blade after removing a nut (A).




2. Remove the weather strip and the cowl top cover (A) after removing 4 rivets.




3. Remove the windshield wiper motor and linkage assembly after removing 2 bolts. Disconnect the wiper motor connector (A) from the wiper motor & linkage assembly.






Installation

1. Install the wiper motor and linkage assembly and then connect the wiper motor connector.

TORQUE : 7-11Nm (0.7-1.1, kgf.m, 5.0-7.9 lbf.ft)


2. Install the cowl top cover.
3. Install the windshield wiper arm and blade.

TORQUE : 23 - 27 Nm (2.3 - 2.7 kgf.m, 17 - 20.1 lbf.ft)