Diesel Data: Automotive Repair
Home >> Hyundai >> 2010 >> Accent L4-1.6L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Replacement >> Repair Procedures

Repair Procedures





Replacement

1. Disconnect the battery negative terminal first, then the positive terminal.
2. Temporarily loosen the water pump pulley bolts.




3. Remove the alternator drive belt(A) , after loosening the adjusting bolt and mounting bolt.
4. Remove the power steering pump belt(B).




5. Remove the water pump pulley.
6. Remove the power steering pump.
7. Remove the power steering pump bracket.
8. Disconnect the alternator connector (A), and remove the cable (B) from alternator "B" terminal.




9. Remove the adjusting bolt (A) and mounting bolt (B).
10. Remove the alternator brace(C).
11. Pull out the through bolt (D) and then remove the alternator (E).




12. Installation is the reverse order of removal.
13. Pretighten the water pump pulley bolts.
14. Adjust the power steering pump belt tension.
15. Adjust the alternator belt tension after installation.
16. Tighten the water pump pulley bolts.
Diesel-Data.com