Monitor DTC Status

Air Conditioner

Air Conditioner - B1208 Intake Potentiometer Open (Low) - Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Engine "ON".
3. Monitor the " Intake potentiometer" Parameter on the Scantool. While operating Intake switch.




4. Are the DTC B1208 present and is parameter of "Intake potentiometer" fixed?

NOTE:
** Parameter of "Intake potentiometer" will be fixed at 100% (or any value above 90%), or 0% (or any value below 10%), if there is any fault in Intake actuator.