Monitor DTC Status

Airbag

Airbag Control Unit - B1651 Crash recorded in front-Driver side airbag (Replace ECU) - Monitor Scantool Data

Monitor Scantool Data

1. Ignition "OFF", connect scantool.
2. Ignition "ON" & Engine "OFF", select "Diagnostic Trouble Codes (DTC)" mode.
3. Monitor diagnostic trouble code and present of trouble code.




4. Is DTC present problem?
YES
1) DTC caused by deployment of front driver side air bag. Substitute with a SRSCM and check for proper operation. If the problem is corrected, replace SRSCM and then go to "Verification of Vehicle Repair" procedure.