Monitor DTC Status

Air Conditioner

Air Conditioner - B2408 Intake Motor - Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Engine "ON".
3. Monitor the " Intake potentiometer" Parameter on the Scantool. While operating Intake switch.




4. Are the DTC B2408 present and is parameter of "Intake potentiometer" fix

NOTE:
** There is any fault in Intake actuator. If the parameter of "Intake potentiometer" is 30% or less when the actuator operates to the FRE position, or If the parameter is 60% and more when the actuator operates to the REC position