Verification of Vehicle Repair

Brake

ABS/ESC - C1202 Wheel Speed Sensor Front-LH Invalid/no Signal - Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode
2. Using a scantool, Clear DTC.
3. Operate the vehicle within DTC Detecting Condition in General Information. (Start and drive vehicle in gear and maintain vehicle speed at or above 50kmh. (31 mph)
4. Are any DTCs present?