Overhaul

Disassembly

1. Remove the snap ring (A).




2. Remove the hub assembly from the knuckle assembly.
(1) Install the front knuckle assembly (A) on press.
(2) Lay a suitable adapter (B) upon the hub assembly shaft.




(3) Remove the hub assembly (B) from the knuckle assembly (A) by using press.




3. Remove the hub bearing inner race from the hub assembly.
(1) Install a suitable tool (A) for removing the hub bearing inner race on the hub assembly.
(2) Lay the hub assembly and tool (A) upon a suitable adapter (B).
(3) Lay a suitable adapter (C) upon the hub assembly shaft.
(4) Remove the hub bearing inner race (D) from the hub assembly by using press.




4. Remove the hub bearing outer race from the knuckle assembly.
(1) Lay the hub assembly (A) upon a suitable adapter (B).
(2) Lay a suitable adapter (C) upon the hub bearing outer race.
(3) Remove the hub bearing outer race from the knuckle assembly by using press.




5. Replace hub bearing with a new one.

Reassembly

1. Install the hub bearing to the knuckle assembly.
(1) Lay the knuckle assembly (A) on press.
(2) Lay a new hub bearing upon the knuckle assembly (A).
(3) Lay a suitable adapter (B) upon the hub bearing.
(4) Install the hub bearing to the knuckle assembly by using press.

CAUTION:
- Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
- Always use a new wheel bearing assembly.




2. Install the hub assembly to the knuckle assembly.
(1) Lay the hub assembly (A) upon a suitable adapter (B).
(2) Lay the knuckle assembly (C) upon the hub assembly (A).
(3) Lay a suitable adapter (D) upon the hub bearing.
(4) Install the hub assembly (A) to the knuckle assembly (C) by using press.

CAUTION:
- Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.




3. Install the snap ring (A).