Component Inspection

Transmission

Automatic Transaxle - P0905 Gate Select Position Circuit Range/Performance - Component Inspection

Component Inspection

1. Ignition "OFF".
2. Connect "Sports mode s/w" connector.
3. Ignition "ON" & Engine "OFF'.
4. Measure the voltage between wiring side of "Sport mode select s/w, Sport mode up s/w, Sport mode down s/w" and chassis ground.
5. Confirm voltage change when select "+, -".

Specification :12 V (Before select) -> 0 V (After select)

6. Is "Measured voltage" within specification?