Repair procedures

Removal

1. Disconnect (-) terminal from the battery in order to prevent current from flowing through wire.




2. Remove the shift lever knob by rotating counter clockwise.




3. Remove the indicator assembly.




4. Remove the shift cable assembly (C) by pulling out the snap pin (A) and the socket (B).

NOTE:
Remove the cable upward by pulling the marking part of the socket (B) with thumb.




5. Disconnect the sports mode switch connector.




6. Remove the shift lever assembly by removing bolts(4ea).




7. Remove the retainer by removing nuts(2ea) on the floor.




8. After removing the shift cable assembly from the transmission, pull the shift cable assembly inside the vehicle.

NOTE:
In case of replacing the shift cable assembly, do this procedure.

Installation

1. After inserting the shift cable assembly inside the vehicle. install the shift cable assembly to the transmission,

NOTE:
In case of replacing the shift cable assembly, do this procedure.

2. Install the retainer by installing nuts(2ea) on the floor.




3. Install the shift lever assembly by installing bolts(4ea).




4. Connect the sports mode switch connector.




5. Install the shift cable assembly (C) by inserting the snap pin (A) and the socket (B).




6. Install the indicator assembly.




7. Install the shift lever knob by rotating clockwise.




8. Connect (-) terminal to the battery.