Monitor DTC Status
Tire Pressure Monitoring
Tire Pressure Monitoring System - C1312 Sensor 1 RF Failure - Monitor Scantool Data
Monitor Scantool Data
1. Connect 'TPMS exciter' or scantool to Data Link Connector (DLC).
2. Select "TPMS DIAGNOSIS" mode.
3. Select the "FULL" mode of "CURRENT DATA" function.
4. Monitor the parameter of SENSOR 1 on the 'TPMS exciter' or scantool after 20 minutes.
5. Is parameter normal?
YES
1) Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet.
2) Go to "Verification of vehicle Repair" procedure.
NO
1) Go to "Component Inspection" procedure.