Ignition Coil: Service and Repair

Inspection

1. Measure the primary coil resistance between terminals (+) and (-).





Standard value:0.75Ohms ± 15%

Replacement

1. Remove the engine cover.
2. Remove the ignition coil with bolt.

Tightening torque :
7.8 - 9.8N.m (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)





NOTE:
When removing the ignition coil connector, pull the lock pin(A) and push the clip(B).




3. Installation is the reverse of removal.