General Information

Air Conditioner
B1245 Air Mix Potentiometer Open (Low)-Driver - General Information

Component Location





General Description

The temperature control actuator is mounted at the heater control unit. The temperature control actuator consists of a motor and a feedback potentiometer.Temperature control actuator regulates the temperature by the procedure as follows. Signal from control unit adjusts position of temp door by operating temp motor and then temperature will be regulated by the hot/cold air ratio decided by position of temp door. In operation, potentiometer delivers temp door position transformed into voltage value to A/C ECU.

DTC Description

Air conditioner Control Module sets DTC B1245 if Feedback signal of Driver Air mix actuator(Temperature actuator) has been detected open or below 0.1V for 100ms.

DTC Detecting Condition





Specification

** Voltage value of Air Mix potentiometer as a function of temp door position.






Diagnostic Circuit Diagram