Scantool Diagnostics

Air Conditioner
B2408 Intake Motor - Scantool Diagnostics

Monitor GDS data

Check Actuation Test
1. Connect GDS with diagnostic connector.
2. Warm up the engine to normal temperature after engine start.
3. Select " Intake Potentioner " parameter on the current data with GDS.
4. Perform Actuation Test for " Air Inlet Mode Selection - Reculation /Fresh in order.
5. With performing Actuation test, check that the value of each position sensors are changing.

Specification :Recirculation : About 90%, Fresh : About 10%.




6. Are the value of each position sensors changed when performing actuation test ?