Component Inspection

ABS/ESC
C1260 Steering Angle Sensor Circuit-Signal - Inspection/Repair:_:Component Inspection

Component Inspection

Steering Angel Sensor Check
1. ENG "ON".
2. Turn the steering wheel to the left or right.
3. Measure waveform between signal terminal of the steering angle sensor harness connector and chassis ground with osciloscope.

Specification :Check the voltage range (HIGH : 2.9±0.1V ~ 4.4±0.1V LOW : 1.2±0.1V ~
2.1±0.1V) of the sensor signal in case of turning left, turning right, center position.
If normal waveforms such as fig1, 2, 3 are detected in each condition, It is normal.




4. Is the measured waveform within specifications?