Scantool Diagnostics

ABS/ESC
C1260 Steering Angle Sensor Circuit-Signal - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. IG "ON", ENG "ON".
3. Turn the steering wheel to the left or right.
4. Monitor the "STEERING SNSR" parameters on the GDS.

Specification :If the parameters are changed according to wheel position during steering
the wheel, it is normal condition.




Fig 1) Test Condition : Ignition "ON" & Engine "ON".
Normal Data
5. Whenever steering wheel is turned, is the steering sensor's scantool data changed?