Scantool Diagnostics

Power Steering
C1702 Variant Coding Error - Scantool Diagnostics

Monitor Scantool Data

EPS Type recognition
1. Connect scantool to Data Link Connector(DLC)
2. Ignition "OFF" and then Ignition "ON".
3. Monitor the "Vehicle S/W Management" parameter on the scantool (figure 1).
4. Choose the area type (figure 2).
5. Ignition "OFF" & Wating 20sec.
6. Ignition "ON".
7. Select "Diagnostic Trouble Codes(DTCs)" mode again.
8. Are any DTCs present ?