Scantool Diagnostics

Airbag(Event #1)
B137300 Passenger airbag active vent resistance too high - Scantool Diagnostics

Monitor Scantool Data

1. Ignition "OFF", connect scantool.
2. Ignition "ON"& Engine "OFF", select "Current Data" mode.
3. Monitor the "Passenger airbag active vent resistance" parameter on the Scantool.

Specification :1.6Ohms< Resistance of Passenger airbag active vent < 6.0Ohms

Reference :In a case of an open in the 2nd stage Passenger airbag circuit : FAIL
In a case of a short to battery in the 2nd stage Passenger airbag circuit: FAIL
In a case of a short to ground in the 2nd stage Passenger airbag circuit : FAIL




Fig.1) Normal Data
4. Is parameter displayed within specifications?