Component Inspection

Airbag(Event #1)
B149300 OCS(Occupant Classification System) Communication error - Inspection/Repair:_:Component Inspection

PODS Reset

1. Ignition "OFF", connect scantool.
2. Ignition "ON"& Engine "OFF", select Passenger Occupant Detecting System and select "PODS Reset" mode.
3. And then press "ENTER"
















4. Monitor the "PAB Real Time Information Of Current Data" parameter on the Scantool.




Fig.1) PODS Rezero 1
Fig.2) PODS Rezero 2
Fig.3) PODS Rezero 3
Fig.4) PODS Rezero 4
fig.5) PAB Real Time Status Of Current Data : Occupant
5. Is DTC present problem ?






Component Inspection

1. Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.
2. Ignition "OFF".
3. Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.
4. Disconnect Passenger side PODS-F sensor Mat & ECU connector.
5. Substitute the Passenger side PODS-F sensor Mat & ECU and check for proper operation.
6. Is DTC present problem ?