Component Inspection

Assist Door Module
B191200 Outside Mirror - Right horizontal Motor or Sensor - Inspection/Repair:_:Component Inspection

Component Inspection

Check mirror motor
1. Connec GDS.
2. IG "ON" & ENG "OFF".
3. Select "Actuation Test" mode.
4. Execute "RH Outside Mirror (LEFT, RIGHT)" test.

Specification :Turned to pressed direction




Fig.1) Actuation test of the outside mirror horizontal motor at the passenger seat side
5. Is motor working normal ?





Check switch
1. IG "ON" & ENG "OFF".
2. After connect GDS, select "Current Date" menu.
3. Change an outside mirror select switch into a passenger operating mode.
4. Check if a power of a passenger outside mirror horizontal sensor changes normally when operating the outside mirror switch into the left/right side.

Specification :Approx. 0.86V - Voltage at the maximum operation to left
Approx. 4.1V - Voltage at the maximum operation to right








Fig.1) The current data of outside mirror horizontal sensor's power at the passenger side - Voltage at the maximum operation to left (Approx. 0.86V)
Fig.2) If the problem is corrected, replace the ADM and go to "Verification of Vehicle Repair" procedure.
5. Is the service data normal ?