W/Harness Inspection

Assist Door Module
B191200 Outside Mirror - Right horizontal Motor or Sensor - Inspection/Repair:_:W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found ?






Signal Circuit Inspection

1. IG "ON" & ENG "OFF".
2. Measure the signal waveform of "Horizontal Sensor" with pressing the power window assist switch.

Specification :It is same as Signal waveform and Data

3. Is the signal output normal ?