Component Inspection

Assist Door Module
B191300 Outside Mirror - Right vertical Motor or Sensor - Inspection/Repair:_:Component Inspection

Component Inspection

Check mirror motor
1. Connect GDS.
2. IG "ON" & ENG "OFF".
3. Select "Actuation Test" mode.
4. Execute "RH Outside Mirror (UP, DOWN)" test.

Specification :Turned to pressed direction




Fig.1) Actuation test of the outside mirror vertical motor at the passenger seat side
5. Is motor working normal ?





Check switch
1. IG "ON" & ENG "OFF".
2. After connect GDS, select "Current Date" menu.
3. Change an outside mirror select switch into a passenger operating mode.
4. Check if a power of a passenger outside mirror vertical sensor changes normally when operating the outside mirror switch into the UP/DOWN side.

Specification :Approx. 0.5V - Voltage at the minimum operation to down
Approx. 4.24V - Voltage at the maximum operation to up








Fig.1) The current data of outside mirror vertical sensor's power at the passenger side - Voltage at the maximum operation to up (Approx. 4.24V)
Fig.2) The current data of outside mirror vertical sensor's power at the passenger side - Voltage at the minimum operation to down (Approx. 0.5V)
5. Is the service data normal ?