Scantool Diagnostics

Tire Pressure Monitoring
C1315 Rear Right Sensor RF Channel Failure - Scantool Diagnostics

Monitor GDS Data

** In a case that there are any other DTCs except for C1315 at self-diagnosing, first repair the problems related to those DTCs and then see if C1315 happens again.
1. Connect GDS to Data Link Connector.
2. IG KEY ON.
3. Select Sensor status in "Vehicle S/W Management".
4. Postion the GDS TPMS as near as possible to the tire.
5. Check a sensor's ID out of sensor's information.
(Reading may take 30 - 60 seconds depending on the sensor's characteristics.)

Measuring method :Refer to No.1 Measurement




NO.1) A method of checking a sensor ID with TPMS Exciter




Fig.1) Data displayed by TPMS Exciter
6. Does the sensor ID match the ID listed in the TPMS ECU?