Scantool Diagnostics

Tire Pressure Monitoring
C1613 CAN signal error EMS (Check EMS) - Scantool Diagnostics

GDS Diagnostics

Check DTC
1. Connect GDS with diagnostic connector.
2. Check that there is DTC on the engine side.
3. If the information of a DTC status is an active faults, perform the next inspection procedure,also if the information of the DTC is a historic faults , clear the DTC and check whether the warning lamp is turned on.
4. If there is the C1616 DTC related to a line for CAN communication, firstly you must check it and repair it.
5. If there is not any DTC and the C1613 DTC is an active faults, select " Speed1 and Wheel Speed" items in the Current data of GDS.
6. Check that the value of wheel speed sensor is changable with driving the vehicle.

Specification :Check wheel speed is changeable together with vehicle speed changes.




7. Is the Speed Signal normal ?