Scantool Diagnostics

Tire Pressure Monitoring
C1660 Receiver Radio Frequency Circuit Failure - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS with diagnostics connector
2. Check DTC status of TPMS with GDS
3. If DTC status is current condition, go to following procedure. And, if it is histroy DTC, erase it and check that MIL is ON again.
4. Check that current data is correctly displayed while driving.

Specification :The service data of each TPMS sensor can be normally shown on the GDS.




5. Does the service data look normal or common when compaired to other vehicles?