Evaporative Emission Control Canister: Service and Repair

Removal

1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2. Disconnect the ventilation hose (A) from the fuel tank air filter.
3. Disconnect the vapor tube quick-connector (B) and the quick-connector (C).




4. Remove installation bolts (A) and then remove the canister assembly.








5. Remove the bracket (A) from the canister after removing a bolts (B).










Inspection

1. Check for the following items visually.
A. Cracks or leakage of the canister
B. Loose connection, distortion, or damage of the vapor hose/tube




A: Canister <-> Atmosphere
B: Canister <-> Fuel Tank
C: Canister <-> Intake Manifold

Installation

1. Installation is reverse of removal.

Canister installation bolt :
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)