Repair procedures

Replacement

CAUTION:
- When installing the belt, make sure not to damage the retractor.

1. Remove the rear package tray trim.

2. After loosening the rear seat belt retractor (B) mounting bolt, then remove the rear seat belt (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




[Center]

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




3. Installation is the reverse of removal.

NOTE:
- Replace any damaged clips.