Rear Upper Arm

Replacement

1. Remove the rear wheel & tire (A).

Tightening torque:
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
- Be careful not to damage to the hub bolts when removing the rear wheel & tire.

2. Loosen the bolt & nut and then remove the rear upper arm (A) with the rear axle.

Tightening torque:
137.3 - 156.9N.m(14.0 - 16.0Kgf.m, 101.3 - 115.7lb-ft)




3. Loosen the bolt & nut and then remove the rear upper arm (A) with the sub frame.

Tightening torque:
156.9 - 176.5N.m(16.0 - 18.0Kgf.m, 115.7 - 130.2lb-ft)




4. Installation is the reverse of removal.

CAUTION:
- Install the rear upper arm so that the letter "R" can face the rear of vehicle.

Inspection

1. Check the bushing for wear and deterioration.
2. Check the rear upper arm or damage and deformation.
3. Check for all bolts and nut.