Forward Looking Camera: Description and Operation

Description

Front blind camera is a supplemental system that shows blind spot in front of the vehicle through the AV monitor.
The front blind camera will operate when you push the button and shift the transaxle into N(Neutral) or D(Drive) while driving less then 10km/h. After the vehicle stops for 4 minutes with the transaxle in N(Neutral) or D(Drive), it will bring up the previous screen.
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the REVERSE position.
This system is a supplemental system that shows behind the vehicle through the AV monitor while backing-up.

WARNING:
This system is a supplementary function only. It is the responsibility of the driver to always check the inside/ outside rearview mirror and the area behind the vehicle before and while backing up because there may be blind spot that can't be seen by the camera.