Repair procedures

Replacement

1. Remove the front bumper cover.

2. Detach the clips, then remove hood latch cover (A).




3. Remove the hood latch (A) mounting bolts.

Tightening torque :
7.8 - 11.8N.m (0.8 - 1.2kgf.m, 5.8 - 8.7 lb-ft)




4. Disconnect the hood latch cable (A) and remove the hood latch (B).




5. Installation is the reverse of removal.

NOTE:
- Make sure the hood latch cable is connected properly.
- Make sure the hood locks/unlocks and opens/closes properly.
- Adjust the latch alignment.