Exterior Moulding / Trim: Service and Repair

Replacement

[General Type]

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Using a screwdriver or remover, remove the roof side molding (A).




2. Installation is the reverse of removal.

NOTE:
- Replace any damaged clips.

[Panorama roof Type]

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Using a screwdriver or remover, remove the roof molding (A).




2. Installation is the reverse of removal.

NOTE:
- Replace any damaged clips.