Repair procedures

Replacement

CAUTION:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Put on gloves to protect your hands.

1. Remove the rear back armrest.

2. Using a screwdriver or remover, remove the rear seat back armrest inner cover (A).




3. Disconnect the connector (A).




4. Using a screwdriver or remover, remove the rear seat armrest remote control (A).




5. Disconnect the connectors (A).




6. After loosening the mounting screws, then remove the rear back armrest cup holder (A).




7. Installation is the reverse of removal.

NOTE:
- Make sure the connectors are plugged in properly.
- Replace any damage clips.