Repair procedures

Replacement

CAUTION:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Put on gloves to protect your hands.

1. Remove the rear seat assembly.

2. Disconnect the connectors (A), and mounting wireing clips (B).




3. After loosening the mounting screws, then remove the rear back armrest board (A).




4. After loosening the mounting bolts, then remove the rear back armrest (A).




5. Remove the rear back armrest board (A) after loosening the screws on the rear back armrest (B).




6. Installation is the reverse of removal.

NOTE:
- Make sure the connectors are plugged in properly.