Repair procedures

Replacement

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Take care not to scratch the body surface.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the crash pad side cover (A).




2. Using a screwdriver or remover, remove the fuse box cover (A).




3. After loosening the mounting screws, then remove the crash pad lower panel (A).




4. Disconnect the diagnosis connector (A) and connector (B).




5. After loosening the mounting screws, then remove the crash pad garnish [LH] (A).




6. After loosening the mounting screws, then remove the cluster fascia panel (A).




7. Installation is the reverse of removal.

NOTE:
- Make sure the connector are connected in properly.
- Replace any damaged clips.