Repair procedures

Replacement

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Take care not to scratch the body surface.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the crash pad side cover (A).




2. Disconnect the stopper (B) from the glove box (A).




3. Disconnect the air damper (A) from the glove box (B).




4. Disconnect the pin (A) and then remove the glove box (B).




5. After loosening the mounting screws, then remove the passenger's under cover (A).




6. Disconnect the connector (A).




7. After loosening the mounting screws, then remove the glove box housing (A).




8. Disconnect the connectors (A).




9. Installation is the reverse of removal.

NOTE:
- Make sure the connector are connected in properly.
- Replace any damaged clips.