Repair procedures

Replacement

CAUTION:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the front door scuff trim (A).
[Front]




2. Disconnect the connector (A).




3. Remove the rear seat cushion assembly.

4. After loosening the mounting screw, then remove the rear door scuff trim (A).
[Rear]




5. Disconnect the connector (A).




6. Installation is the reverse of removal.

NOTE:
- Make sure the connector are connected in properly.
- Replace any damaged clips.